User interface
54
Note:
The fault log is collected and stored by the SREA-01 unit. Therefore the log
will only show faults that have occurred when the SREA-01 is connected to the drive
and powered on.
Because the fault logger can only detect faults when the SREA-01 is connected to
the drive, there are also special “Online” and “Offline” events. The “Logger started”
event is generated every time when the SREA-01 is powered on or a new drive is
configured to the SREA-01. A “Drive disconnected” event is generated whenever the
drive stops responding to SREA-01 and a “Drive connected” event whenever it starts
responding again.
The fault list can be saved to the PC by pressing the ‘save’ button. The faults are
stored in plain text format. Example of a fault log file:
[SREA-01 Fault Log File]
2008-06-02 09:20:44
ACS350 (Scalar) (22)
ACS350 (Scalar)
DATE
TIME
TYPE
DESCRIPTION
2008-06-02
09:15:36
ONLINE
DRIVE CONNECTED
2008-06-02
09:15:35
OFFLINE
DRIVE DISCONNECTED
2008-06-02
09:03:16
+FAULT
SERIAL 1 ERR
2008-06-02
09:03:15
ONLINE
LOGGER STARTED
The ‘clear’ button can be used to clear the list.
Summary of Contents for SREA-01
