![background image](http://html.mh-extra.com/html/abb/srea-01/srea-01_user-manual_219013.webp)
Introduction
13
automatically. Most big company networks and Internet connections offer DHCP
service so the user does not have to configure the network settings manually.
DynDNS
DynDNS® is free Dynamic Domain Name Service from Dyn Inc. It allows the SREA-
01 module to have a fixed hostname such as srea01.example.com even if the actual
network address is regularly changing. This is often beneficial when using a
consumer-level Internet connection, for example a typical GPRS connection. For
more information, see
.
Fault
Fault is a serious error condition that prevents the drive from running. SREA-01 can
show the reasons for the last drive faults and optionally send alarm messages when
a fault condition occurs.
Fieldbus adapter
A fieldbus adapter is an option module of the drive that makes it possible to control
the drive remotely and access its parameters. In this manual, fieldbus adapter
means some other adapter than SREA-01, for example the FPBA-01 Profibus
Adapter.
GPRS
GPRS stands for General Packet Radio Service. It is a packet-oriented data service
that is used in GSM networks to provide mobile Internet access, for example.
IP Address
IP Addresses are unique addresses that identify the devices in a network. They are
used in Ethernet networks and on the Internet.
Modem
Modem is a device that connects SREA-01 over a telephone network. GSM/GPRS
modem can be used to connect SREA-01 to a mobile telephone network while an
analog modem can be used for communicating on a traditional, analog telephone
network.
Modbus
Modbus® is a standard, widely-used fieldbus protocol that is used by SREA-01 to
connect to the drive. For more information on Modbus, see section
on page
. The Modbus implementations of ABB drives work on top of
RS-232, RS-485 or TCP/IP.
Node address
Node addresses are unique addresses that identify the device in a network. They
are used in Modbus networks to identify the drives.
Parameter
A parameter is an operation instruction for the drive. Parameters can be read and
programmed with the drive control panel, or by the SREA-01 module. Usually
parameters are in groups 10…99 of the drive.
Summary of Contents for SREA-01
