ABB SREA-01, User Manual

Page: 87 / 106

Configuration pages
87
Log
SREA-01 can be used to log the values of actual values and parameters of the drive.
All data is stored in a CSV file that can be uploaded to a computer for further
analysis in eg, Microsoft Excel. A maximum of 64 log parameters can be configured.
Estimated Log Time – gives an estimate about how long it takes to fill the log file.
Log interval – defines the sample interval. Possible values: 10 sec., 30 sec., 1 min.,
2 min., 5 min., 10 min., 30 min. and 60 min.
Log type – choose whether to stop logging when the log has reached its maximum,
or to overwrite old values (circular log).
Send log interval – enable this if you want to send the log files periodically by E-
mail or FTP. You can choose to send the log every 1 minutes, 5 minutes, 10 minutes,
30 minutes, 60 minutes, 12 hours, 24 hours (will be sent around midnight) and 7
days (Sunday at midnight). The log files can also be sent when the memory of the
module is full.
Send log files as E-mail attachment – enable this if you want to send the log files
periodically by E-mail with the ‘send log interval’ set above. Make sure that each
user that should get the logs by E-mail has this function activated on the user setup
page, see section
Users on page 61 .
Upload log files to FTP server – enable this to upload the log file to an FTP server
periodically with the ‘send log interval’ set above. Make sure that the there is an FTP
server set up at Setup – FTP, see section
FTP on page 73 for more information.