•
If a function has been removed, it has been replaced by another function or
the migration has not been possible for other reasons.
•
If a signal has been removed, it has a new functional meaning. See the
technical manual to ensure how the functions are used correctly. Even if
the function has a new version number, the actual change in the function
itself might be very minor.
2.
Save the Application Configuration tool configuration again and exit.
See the technical manual for version history of the functions and
for the IEC 61850 Edition 1 vs. Edition 2 mapping.
8.5.1.1
Example of reengineering LED connections
LED functionality has changed in Ver.2.0. For example, the color of the LEDs when
an alarm is triggered can be changed. Therefore LED connections must be
reengineered to achieve the desired IED LED panel functionality. In older versions
they can be found under hardware but in Ver.2.0 and later versions under
configuration as programmable LEDs.
1.
Right-click an IED to be configured and select
Application Configuration
.
Locate the LED connections page in Application Configuration. Missing output
blocks are represented in red.
1MRS757810 C
Section 8
Configuration migration
REC615 and RER615
131
Engineering Manual
