Local passwords can be changed only via the LHMI. Remote
passwords can be changed via the LHMI or WHMI or with PCM600.
If the IED-specific Administrator password is forgotten, ABB can provide a onetime
reliable key to access the IED. For support, contact ABB. The recovery of the
Administrator password takes a few days.
1.
Enable IED user authorization at
Main Menu/Configuration/Authorization/
Passwords
in LHMI or WHMI.
2.
Use the IED Users tool in PCM600 to change the passwords.
This tool cannot be used to add or change users.
GUID-DF4E526E-401B-47A4-B002-2B67DCB79776 V1 EN
Figure 39:
Changing the password using the IED User Management tool
3.
Set the object property values in PCM600 to make the communication between
the IED and PCM600 work, if the remote authentication has been enabled.
Table 4:
Object properties to change
Object Properties field
Value
Is Authentication Disabled
False
Is Password used
True
Password
Write the correct password
Section 4
1MRS757810 C
Setting up a project
62
REC615 and RER615
Engineering Manual
