recommended to divide one big project into multiple smaller
PCM600 projects.
•
To add a protection relay to a project, a suitable Connectivity package is needed.
Protection relays can be added either while connected or disconnected or through
other means such as an IED template.
•
IED objects are uniquely named within the PCM600 project.
Application configuration in the Application Configuration tool
•
Protection and control functions can be configured as needed.
•
The configuration made in the Application Configuration tool is saved to make
the interfaces and signals available for other engineering tools within PCM600,
for example, for the Parameter Setting tool.
Parameter setting and configuration in the Parameter Setting tool
•
Configuration parameters such as CT and VT conversion values of the
transformer module are checked by the tool.
•
If needed, the setting values are checked and adjusted with the Parameter Setting
tool.
Single-line diagram configuration in Graphical Display Editor
•
It is possible to create a single-line diagram for the switching devices in the bay.
•
Measurements can be included when needed.
•
The dynamic elements are linked to the functions created in the Application
Configuration tool; for example, a breaker object is linked to the circuit breaker
control function.
LHMI engineering
•
The LEDs are configured with Application Configuration.
•
The LED behavior is defined with Parameter Setting.
Communication protocol engineering
•
The communication engineering details are protocol-dependent.
•
The connectivity package creates the IEC 61850 configuration for vertical
communication automatically and it is directly suitable, in most cases, for IEC
61850 client configuration. Either IEC 61850 Configuration tool or IET600 is
needed for configuring horizontal and vertical communication.
•
The Communication Management tool is used for other protocols; for example
Modbus.
Section 2
1MRS757810 C
Relay engineering process
20
REC615 and RER615
Engineering Manual
