ABB REC650 ANSI, Technical Manual

Page: 412 / 700

Table 326: B16IFCVI Output signals
Name Type Description
OUT INTEGER Output value
11.6.5 Settings
The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
11.6.6 Monitored data
Table 327: B16IFCVI Monitored data
Name Type Values (Range) Unit Description
OUT INTEGER - - Output value
11.6.7 Operation principle
The Boolean 16 to integer conversion with logic node representation function
(B16IFCVI) will transfer a combination of up to 16 binary inputs INx, where 1≤x≤16, to
an integer. Each INx represents a value according to the table below from 0 to 32768. This
follows the general formula: INx = 2
x-1
where 1≤x≤16. The sum of all the values on the
activated INx will be available on the output OUT as a sum of the integer values of all the
inputs INx that are activated. OUT is an integer. When all INx (where 1≤x≤16) are
activated, that is = Boolean 1, it corresponds to that integer 65535 is available on the
output OUT. The B16IFCVI function is designed for receiving the integer input from a
station computer - for example, over IEC 61850. If the BLOCK input is activated, it will
freeze the logical outputs at the last value.
Values of each of the different OUTx from function block B16IFCVI for 1≤x≤16.
The sum of the value on each INx corresponds to the integer presented on the output OUT
on the function block B16IFCVI.
Name of input Type Default Description Value when
activated
Value when
deactivated
IN1 BOOLEAN 0 Input 1 1 0
IN2 BOOLEAN 0 Input 2 2 0
IN3 BOOLEAN 0 Input 3 4 0
IN4 BOOLEAN 0 Input 4 8 0
IN5 BOOLEAN 0 Input 5 16 0
Table continues on next page
Section 11
1MRK 511 287-UUS A
Logic
406
Technical manual