ABB IRB 2400 Series Product Manual Download | Manualshive

Page: 39 / 242

background image

1.3.12 Safety risks during work with gearbox lubricants (oil or grease)

Description

When handling gearbox lubricants, there is a risk of both personal injury and
product damage occurring. The following safety information must be regarded
before performing any work with lubricants in the gearboxes.

Note

When handling oil, grease, or other chemical substances the safety information
of the manufacturer must be observed.

Note

When aggressive media is handled, an appropriate skin protection must be
provided. Gloves and goggles are recommended.

Note

Appropriate disposal regulations must be observed.

Note

Take special care when handling hot lubricants.

Safe handling

Elimination/Action

Description

Warning

Make sure that protective gear
like goggles and gloves are al-
ways worn during this activity.

Changing and draining gearbox
oil or grease may require hand-
ling hot lubricant heated up to
90 °C.

Hot oil or grease

Make sure that protective gear
like goggles and gloves are al-
ways worn.

When working with gearbox lub-
ricant there is a risk of an allergic
reaction.

Allergic reaction

Open the plug carefully and keep
away from the opening. Do not
overfill the gearbox when filling.

When opening the oil or grease
plug, there may be pressure
present in the gearbox, causing
lubricant to spray from the
opening.

Possible pressure
build-up in gearbox

Continues on next page

Product manual - IRB 2400

39

3HAC022031-001 Revision: P

© Copyright 2004-2018 ABB. All rights reserved.

1 Safety

1.3.12 Safety risks during work with gearbox lubricants (oil or grease)

«
...
37
38
39
40
41
...
»

Summary of Contents for IRB 2400 Series



















































































































































































































































Reviews:

No comments

Related manuals for IRB 2400 Series

Brand: M.J. MALLIS GROUP Pages: 168

Brand: neobotix Pages: 58

Brand: Sanbot Pages: 5

dynamixel AX-12

Brand: Robotis Pages: 38

Brand: Keywish Pages: 113

Brand: IBM Pages: 2

Brand: Barrett Pages: 9

Brand: Robolink Pages: 32

Brand: Tapo Pages: 8

Brand: Stiga Pages: 14

DJI RoboMaster AI Challenge AI Robot 2019

Brand: ICRA Pages: 30

Brand: Kuka Pages: 85

Brand: Kuka Pages: 125

Brand: Innovative Pages: 92

Everybot Swip AS50

Brand: Amibot Pages: 130

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands