ABB i-bus
KNX
Commissioning
52 2CDC 505 056 D0208 | SA/S
The following operating modes are available for each output of a Switch Actuator:
Switch actuator
For “normal” switching, e.g. of lighting.
The output is controlled directly via the communication
object
Switch
. A large number of additional functions
(time, logic, safety, etc.) are possible.
For further information see:
Planning and application
, p. 141
Heating actuator
For control of heating valves, e.g. in an individual room
temperature control system. A room thermostat sends a
control value which the output uses to control the valve,
e.g. as a 2-step control.
For further information see:
Planning and application
, p. 141
Please note
With the introduction of optimized current detection, on all Switch Actuator types the nomenclature for
status messages, e.g.
Telegr.status switch
,
Telegr.RTR fault
, has been converted to the current
nomenclature without Telegr., e.g.
Status Switch, RTR fault
.
Summary of Contents for i-bus SA/S 2.6.2.1
Page 1: ...ABB i bus KNX SA S Switch Actuators Product Manual ...
Page 137: ......
