ABB i-bus
KNX
Commissioning
124 2CDC 505 056 D0208 | SA/S
3.2.5.1
Parameter window A: Function
In this parameter window you determine the response (reaction) of the output and can enable different
functions, which makes further parameter windows available.
Enable monitoring of the controller
Options:
no
yes
•
no
: Parameter window A:
Monitoring
is not enabled for output A.
•
yes
: Parameter window A:
Monitoring
is enabled for output A. There the communication object
RTR
fault
can be enabled for monitoring. Thus a failure of the room thermostat can be detected, the output
changed to fault mode and a parameterized valve position can be set.
Enable function "forced operation"
Options:
no
yes
With forced operation, the output can assume a determined position, e.g. for inspection purposes.
•
no
: Parameter window A:
Forced Operation
is not enabled for output A.
•
yes
: Parameter window A:
Forced Operation
and communication object
Forced Operation
are enabled
for output A.
Summary of Contents for i-bus SA/S 2.6.2.1
Page 1: ...ABB i bus KNX SA S Switch Actuators Product Manual ...
Page 137: ......
