ABB FS4000, Operating Instruction

Page: 72 / 126

Parameterization
72 FV4000 / FS4000 D184B097U02
Buttons Menu item Buttons Set parameter Buttons
Configurable
parameters
Comments
„Enter“ + „Enter“
„Data“
„Step“ Units
Temp
„Enter“
°C_
F_ Selection:
°C, F, K
„Enter“
„Data“
„Step“ Reference
Temp
20.0 °C
Selection:
-200.0 ... 500
The menu appears when the following operating
modes are selected:
Fluid Qm (D), fluid Qm (D,T), gas standard Qn (Kmpf)
„Enter“ +
„Data“
„Step“ Pressure
Poper abs
„Enter“
1.0 bar
The menu appears when the following operating
mode is selected:
Gas mass Qm (pT)
„Enter“ +
„Data“
„Step“ Vol.Exp-
ansion
„Enter“
1.00 %./K
The menu appears when the following operating
mode is selected:
Fluid Qm (V,T)
„Enter“ +
„Data“
„Step“ Density
extens.
„Enter“
1.00 %./K
The menu appears when the following operating
mode is selected:
Fluid Qm (D,T)
„Enter“ + „Step“
„Data“
„Step“ Units
Qvol
„Enter“
l/s _
l/m _
Selection:
l/s, l/m, l/h, m3/s, m3/m, m3/h, m3/d, ft3/s, ft3/m, ft3/h,
ft3/d, usgps, usgpm, usgph, usmgd, igps, igpm, igph,
igpd, bbl/s, bbl/m, bbl/h, bbl/d
The menu appears when the following operating
modes are selected:
Fluid Qm (D,T), fluid Qm (V,T), gas mass Qm (pT),
gas mass Qm (D)
„Enter“ + „Step“
„Data“
„Step“ Units
Qm
„Enter“
g/s _
g/m _
Selection:
g/s, g/m, g/h, kg/s, kg/m, kg/h, kg/d, t/m, t/h, t/d, lb/s,
lb/m, lb/h, lb/d
The menu appears when the following operating
modes are selected:
Fluid Qm (D), fluid Qm (D,T),
gas standard Qn (Kmpf), gas mass Qm (pT),
gas mass Qm (D)
Important
The "Qvol" and "Qm" parameters are
dependent upon the selection made under
"Operating mode".