ABB FS4000, Operating Instruction

Page: 121 / 126

Appendix
D184B097U02 FV4000 / FS4000 121
14.3 Overview of technical design and setting parameters
Measuring point: TAG no.:
Sensor model:
Order no. Device no.:
Medium: Voltage supply:
Parameter Setting range
Prog. protection code: 0-9999 (0=factory setting)
Language:
Nominal size: DN 15 - 400
Operating mode:
Q
max
0.15 Q
max
DN to 1.15 Q
max
DN
Standard factor: 0.001 - 1,000 (operating density / standard density)
Reference density:
Density unit: g/ml, g/cm3, g/l, kg/l, kg/m3, lb/ft3, lb/ugl
Unit Q
vol
l/s, l/min, l/h, l/d, m³/s, m³/min, m³/h, m³/d,
ft3/s, ft3/m, ft3/h, ft3/d, bbl/s, bbl/min, bbl/h, bls/d,
Usgps, USgpm, USgph, Usmgd, igps, igpm, igph, igpd
Unit Q
m
kg/s, kg/min, kg/h, kg/d, t/min, t/h, t/d, g/s, g/min, g/h,
lb/s, lb/min, lb/h, lb/d
Unit totalizer: l, m³, igal, USgal, ft3, bbl, kg, t, g, lb
Max. alarm: %
Min. alarm: %
Pulse factor: 0.001 to 1,000 pulse/phys. unit
Pulse width: 0.100 - 2,000 ms
Low flow (Q
min
):
2 - 25 % of flow range upper range value
Damping: 0.5 - 99.99 seconds
1st display line: Q (%), Q (unit), totalizer, temperature
2nd display line: Q (%), Q (unit), totalizer, temperature
2nd multiplex line: ON / OFF
F HART protocol Communication:
F
PROFIBUS PA
F
FOUNDATION Fieldbus FF