ABB FS4000, Operating Instruction

Page: 91 / 126

Error messages
D184B097U02 FV4000 / FS4000 91
9.2 Error description
Error no. Plain text message Priority Description Possible cause Troubleshooting
Steam
temperature
< 55 °C (131 °F)
Increase steam
temperature
0 Steam calculation 7
Mass flow for
saturated steam
calculated incorrectly
Steam
temperature
> 370 °C (698 °F)
Reduce steam
temperature
1 Front End 1
Problem affecting
preamplifier board
-
Replace transmitter
plug-in module /
Contact ABB Service
2 Not assigned - - - -
Measuring range
too small
Increase "Qmax!"
measuring range
3 Flow > 3 % 2
The value set in
Qmax is being
exceeded by more
than 3 %
Flow too large Reduce flow
4 Not assigned - - - -
5 M database 0
Main database
damaged beyond
repair, loss of
transmitter's internal
database
Reduce flow
Replace meter and
switch back on, replace
transmitter plug-in
module
if necessary, contact
ABB Service
6
Meter damaged
beyond repair
1
Flowmeter damaged
beyond repair, values
displayed are invalid
- Reprogram the meter
Pt100 faulty Replace sensor
7 Temperature 7
Problem affecting
temperature
measurement
Wiring errors
between sensor
and transmitter
affecting VR / SR
models
Check wiring
8 Not assigned - - - -
9
Qv > 120 % of
QmaxDN
2
Maximum possible
measuring range
(QmaxDN) overshot
Flow too large
(software only)
level < A30
Reduce flow
B B base 0
Backup database
damaged beyond
repair, loss of
external database
(sensor board)
External database
faulty
Switch the meter off
and back on again,
sensor board might be
faulty, contact ABB
Service