ABB DressPack IRB6650S Product Manual Download Page 265

Page: 265 / 390

Refitting the cable package - IRBDP MH3 LI

Connect the lower cable package at the base

Note

Action

DANGER

Turn off all:

•

electric power supply

•

air pressure supply

to the robot, before starting the repair work on the
robot.

CAUTION

The cable package is sensitive to mechanical
damage. Handle it with care in order to avoid
damaging the cabling or the connectors.

xx1400000080

Remove the rear cover plate.

xx1400001146

Fit the customer plate.

Screw, M6x16 8.8-A2F (4 pcs)

xx1400001140

Fit the adapter complete to the customer plate.

Continues on next page

Product manual - DressPack/SpotPack IRB 6650S

265

3HAC055424-001 Revision: C

4 Repair

4.2.8 Replacing the cable package IRBDP MH LI

Continued

Summary of Contents for DressPack IRB6650S






































































































































































































































































































































































































Search results

Summary of Contents for DressPack IRB6650S

Reviews:

Brands by name

Popular brands

ABB DressPack IRB6650S, Product Manual

Search results

Summary of Contents for DressPack IRB6650S

Reviews:

Brands by name

Popular brands