II K 5-1
Installation
5
Installation
General
Incoming inspection
Check the contents of delivery
• DCS 400
• Manual
• Mounting template
• Quick installation & commissioning guide
Check the consignment for any signs of damage. If
you find any, please contact the insurance company
or the supplier.
Check the particulars given on the unit's rating plate
to make sure prior to installation and start-up that
you have received the correct unit type and unit
version.
If the consignment is incomplete or contains any
incorrect items, please contact the supplier.
CAUTION!
The thyristor power converter weighs quite a lot and
should therefore not be held by the front cover.
Please put the unit down only on its back. Always
use due care when handling the unit, so as to avoid
injuries or damage.
Storage and transport
If the unit had been in storage prior to installation or is
transported to another location, care must be taken to
ensure that the environmental conditions are com-
plied with.
Rating plate
For purposes of identification, each thyristor power
converter is fitted with rating plates, stating the type
code and the serial number, which serve for each
unit's individual identification.
The type code contains information on the character-
istics and the configuration of the unit.
The technical data and specifications are valid as of
going to press. ABB reserves the right to make
subsequent alterations.
If you have any questions concerning your drive
system, please contact your local ABB agent.
Summary of Contents for DCS 400
