ABB DCS 400, Manual

Page: 104 / 192

II K 5-4
Installation 5.2 EMC Compliant Installation and Configuration for a Power Drive System
Remark
This is a part of the man-
ual
Thyristor Power Con-
verters EMC Compliant
Installation and Configu-
ration for a Power Drive
System - Technical
Guide
Note In order to make the description in this chapter as short and easily
readable as possible, cross references in the form
1 , 2 … are
used.
General Converters and the major part of the devices, which constitute a DC
Drive, cannot fulfil the EMC requirements independently from each
other. They must be installed and connected by skilled personnel
according to the guidelines laid down in this manual. This restriction
is related to the expression “restricted distribution” in the short de-
scription of EN 61800-3, which is the EMC product standard for a
Power Drive System.
EN 61800-3
EMC standard for P ower D rive S ystems (PDS), immunity and
emission in domestic, residential and light industry restricted area
and in industry.
This standard must be complied with to meet the EMC require-
ments for plants and machines in the EC!
If the DC Drive is designed and built up according to this installation
guide then it meets the requirements of EN 61800-3 and of the fol-
lowing standards:
EN 50082-2 Generic standard for noise immunity in
industrial environment
(includes EN 50082-1, domestic environment)
EN 50081-2 Generic standard for noise emission in indus-
trial environment
EN 50081-1 Generic standard for noise emission in do-
mestic environment , can be fulfilled with
special means (line filters, screened power
cables) in the lower power range
NOTE!
The conformity procedure is matter of responsibility of ABB
Automation Products GmbH and of the machine manufactur-
ers or the plant builders corresponding to their share of the ex-
tension of the electrical equipment.