74 Fault tracing
AtF-01
40
Autotune Fault
Measured motor stator resistance varies between
phases. Ensure the motor is correctly connected and
free from faults. Check the windings for correct
resistance and balance.
AtF-02
41
Measured motor stator resistance too large. Ensure
motor is correctly connected and free from faults.
Check that the power rating corresponds to the
power rating of the connected drive.
AtF-03
42
Measured motor inductance too low. Ensure the
motor is correctly connected & free of faults.
AtF-04
43
Measured motor inductance is too large. Ensure the
motor is correctly connected and free from faults.
Check that the power rating corresponds to the
power rating of the connected drive.
AtF-05
44
Measured motor parameters are not convergent.
Ensure the motor is correctly connected and free
from faults. Check that the power rating corresponds
to the power rating of the drive.
Out-ph
49
Output(Motor) phase loss
SC-F01
50
Modbus comms loss fault
Check the incoming Modbus RTU connection cable.
Check that at least one register is being polled
cyclically within the timeout limit set in
1103
Index 3
SC-F02
51
CAN comms loss trip
.Stop .
-
Stop is displayed with
flashing dots
Check power and motor connections. Indicates cross
connection.
FLt-dc
0x0D
DC bus ripple too high
Check power supply network. Check if motor load is
too high.
dAtA-E
0x13
Internal memory fault(DSP)
Refer to your local ABB representative.
U-dEF
0x14
User Default Parameters
loaded
F-Ptc
0x15
Motor PTC thermistor trip
Check if motor temperature is too high. Check PTC
cable connection.
FAN-F
0x16
Cooling Fan Fault
Check stiring cooling fan rotating status. check the
stirring fan cable connection.
Out-F
0x1A
Drive output fault
Check motor cable connection. Check if motor has
short-circuit or insulation failure.
Fault
Code
No.
Description
Corrective Action
ACS260-04.book Page 74 Thursday, December 24, 2020 4:33 PM
Summary of Contents for ACS260-04 Series
