ABB ACS260-04 Series, User Manual

Page: 41 / 98

Application Macros 41

Keypad Mode 1103 PRIMARY COMMAND SOURCE MODE = 1 or 2
Note: By default if the enable signal is present the drive will not Enable until the
START button is pressed. To automatically enable the drive when the enable signal is
9902 Digital input 1
(T2) Digital input 2
(T3) Digital input 3
(T4) Analog input
(T6)
Comments
0, 1,
5,
8..12
Open: Stop
(disable)
Closed: Run
(enable)
Closed :
remote UP
push-button
Closed :
remote DOWN
push-button
Open :
Forward
+24V :
Reverse
2
Open: Stop
(disable)
Closed: Run
(enable)
Closed :
remote UP
push-button Closed :
remote DOWN
push-button
Open :
Keypad
speed ref
+24V : Preset
speed 1
3
Open: Stop
(disable)
Closed: Run
(enable)
Closed :
remote UP
push-button
External trip
input :
Open: Trip,
Closed: Run Closed :
remote
DOWN push-
button
Connect external
motor thermistor
PTC type or
similar to digital
input 3
4
Open: Stop
(disable)
Closed: Run
(enable)
Closed :
remote UP
push-button
Open : Keypad
speed ref
Closed :
Analog input 1
Analog input 1
6
Open: Stop
(disable)
Closed: Run
(enable) Open : Forward
run
Closed :
Reverse run External trip
input :
Open: Trip,
Closed: Run
Open :
Keypad
speed ref
+24V : Preset
speed 1
Connect external
motor thermistor
PTC type or
similar to digital
input 3
7
Open: Forward
Stop
Closed:
Forward Run Open: Reverse
Stop
Closed:
Reverse Run External trip
input :
Open: Trip,
Closed: Run
Open :
Keypad
speed ref
+24V : Preset
speed 1
Closing digital
inputs 1 and 2
together carries
out a fast stop
(
2206 )
9902 =0
+24 Volt
Run (Enable)
Increase Speed
Reduce Speed
+ 10 Volts
Forward / Reverse
0 Volts
Remote push button speed control with fwd/rev
ACS260-04.book Page 41 Thursday, December 24, 2020 4:33 PM