56 Parameters
Parameters in the Long parameter mode
Index
Name/Selection
Description
Def
15
ANALOG/DIGITAL
OUTPUTS
Analog output signal processing
1501
ANALOG OUTPUT
FUNCTION SELECT
Selects the type of output signal information
indicated from terminal 8.
Note
:
When using settings 0 – 7 the output is a digital
format (Logic 1 = 24V).
When using settings 8-9 the output is an analog
format.
8 : OUTPUT
FREQUENCY
(MOTOR
SPEED).
0 : DRIVE ENABLED
(RUNNING).
Logic 1 when the
DRIVE
is enabled (Running)
1 : DRIVE READY.
Logic 1 When no Fault condition exists on the drive
2 : AT TARGET
FREQUENCY
(SPEED).
Logic 1 when the output frequency matches the
setpoint frequency
3: DRIVE TRIPPED.
Logic 1 when the drive is in a fault condition
4 : OUTPUT
FREQUENCY >= LIMIT
Logic 1 when the output frequency exceeds the
adjustable limit set in parameter
3200
RELAY
THRESHOLD LEVEL
5 : OUTPUT CURRENT
>= LIMIT
Logic 1 when the motor current exceeds the
adjustable limit set in parameter
3200
RELAY
THRESHOLD LEVEL
6 : OUTPUT
FREQUENCY < LIMIT
Logic 1 when the output frequency is below the
adjustable limit set in parameter
3200
RELAY
THRESHOLD LEVEL
7 : OUTPUT CURRENT
< LIMIT.
Logic 1 when the motor current is below the
adjustable limit set in parameter
3200
RELAY
THRESHOLD LEVEL
8 : OUTPUT
FREQUENCY (MOTOR
SPEED).
0 to parameter
2008 MAXIMUM FREQUENCY /
SPEED LIMIT
9 : OUTPUT (MOTOR)
CURRENT.
0 to 200% of parameter
9906
MOTOR RATED
CURRENT
10 : MOTOR POWER
0 to 200% of drive rated power.
16
SYSTEM CONTROLS
Parameter lock etc.
1602
PARAMETER ACCESS
UNLOCK
If Parameter
1603
has had a value entered, then the
matching value needs to be entered here in order to
give read-write access to the parameters.
0
0…65535
1603
PARAMETER ACCESS
CODE DEFINITION
To make all parameters Read only, enter a value in
this parameter.
0
0…65535
20 LIMITS
Drive operation limits
2007
MINIMUM
FREQUENCY / SPEED
LIMIT
Minimum output frequency or motor speed limit – Hz
or rpm.
If parameter
9908
MOTOR RATED SPEED >0, the
value entered / displayed is in Rpm
0.0 Hz
0.0
HZ…
2008
Minimum frequency
ACS260-04.book Page 56 Thursday, December 24, 2020 4:33 PM
Summary of Contents for ACS260-04 Series
