ABB ACS260-04 Series, User Manual

Page: 58 / 98

58 Parameters
2102
STOP MODE
0 = Ramp to
stop
2104
DC INJECTION
TIME ON STOP
Defines the time for which a DC current is injected into
the motor once the output frequency reaches 0.0Hz.
The voltage level is the same as the boost level set in
parameter
2603 .
0.0
0.0…25.0 s
DC INJECTION
BRAKING MODE 0
0 DC injection on STOP
1 DC injection on START
2 DC injection on STOP and START
2108
TERMINAL MODE
RESTART
FUNCTION Defines the behavior of the drive relating to the enable
digital input and also configures the Automatic Restart
function. Auto-0
Edge-r Following Power on or reset, the drive will not start if
Digital Input 1 remains closed. The Input must be
closed after a power on or reset to start the drive.
Auto-0 Following a Power On or Reset, the drive will
automatically start if Digital Input 1 is closed.
Auto-1
to
Auto-5
Following a trip, the drive will make up to 5 attempts to
restart at 20 second intervals. The drive must be
powered down to reset the counter
. The numbers of
restart attempts are counted, and if the drive fails to
start on the final attempt, the drive will fault and will
require the user to manually reset the fault.
22 ACCEL/DECEL Acceleration and deceleration times
2202
ACCELERATION
RAMP TIME
Acceleration ramp time from 0 to base speed
(Parameter
9907 MOTOR RATED FREQUENCY) in
seconds.
15.0 s
0.00…600.0 s Time
2203
DECELERATION
RAMP TIME
Deceleration ramp time from base frequency
(Parameter
9907 MOTOR RATED FREQUENCY) to
standstill in seconds. When set to zero, fastest
possible ramp time without trip is activated.
When set to 0.00, the value of
2206 is used.
15.0 s
0.00…600.0 s Time
Setting On Disable On Mains loss
0 Ramp to Stop
(
2203 DECEL
RAMP TIME)
Ride Through
(Recover energy
from load to maintain
operation)
1 Coast Coast
2 Ramp to Stop
(
2203 DECEL
RAMP TIME)
Fast Ramp to Stop
(
2206 2
nd
DECEL
RAMP TIME), coast
if
2206 is zero.
3 Ramp to Stop
(
2203 DECEL
RAMP TIME)
with AC flux
braking
Fast Ramp to Stop
(
2206 2
nd
DECEL
RAMP TIME), coast
if
2206 is zero.
ACS260-04.book Page 58 Thursday, December 24, 2020 4:33 PM