A&D BA-T Series, Instruction Manual

Page: 194 / 220

194
Commands to preset the tare value
Command Description
PT : . g
Sets the preset tare value.
Add the unit in the A&D standard format (3 characters).
If the display unit is PCS or percent (%), set the value in gram.
In the case of setting the preset tare value to 1.23456 g, the input will be
PT:1.23456 g .
Values exceeding the weighing capacity cannot be set. Negative values cannot be
set.
?PT
Requests the tare weight value.
Outputs the tare value set with the
PT, T
, or
TR
command.
Commands to control piece counting
Command Description
UW:
.
g
Sets the unit weight value (weight of one piece).
Add the unit in the A&D standard format (3 characters).
In the case of setting the unit weight value to 1.23 g, the input will be
UW:1.23 g
.
Values exceeding the weighing capacity cannot be set. Negative values cannot be
set.
?UW Requests the unit weight value.
Commands to set time and date
Command Description
TM:
: :
Sets time.
In the case of setting time to "twelve thirty-four fifty-six seconds", the input will be
TM:12:34:56
.
Do not set non-existing time values.
DT: / /
Sets date.
In the case of setting time to "January 23, 2020", the input will be
DT:20/01/23 .
Do not set non-existing date values.
?TM Requests the time.
?DT Requests the date.
Commands to open and close the door (with the touch panel software version 1.019 or later)
Command Description
RD:000
Closes the right door.
RD:001 Opens the right door.
LD:000 Closes the left door.
LD:001
Opens the left door.
?RD
Requests the status of the right door.
RD,000 Closed
RD,001
Opened
?LD
Requests the status of the left door.
LD,000 Closed
LD,001
Opened