64
Editing a sample
Display settings: HOME key
APP button
[Application] settings screen
Application selection button Select [HPLC mode]
HOME key
[HPLC mode] screen Go to the recipe list button
Select the recipe Edit button Edit button [Sample edit] screen
Pressing the Edit button on the [Recipe edit] screen displays the [Sample edit] screen.
1
Molecular formula field
Selection button
2
Target value
5
Tolerance
3
Back button
6
Sample No.
4
Add sample button
7
Register button
Name
Setting value (setting range)
Description
1
[Molecular formula]
field, Selection
button
―
Select the sample to be registered from the Selection button.
Initially this field is blank. You can add samples on the [Sample
registration] screen.
Sample names are displayed below the Selection button.
2
Target value
Balance readability ~
Weighing capacity
Set the target value to be weighed for the selected sample.
3
Back button
―
Displays the [Recipe edit] screen.
The edited contents are discarded and the state before editing is
restored.
4
Add sample
button
―
Displays the [Sample registration] screen.
5
Tolerance
0.001 ~ 100.000
Set the tolerance for the target value to be weighed.
Zero cannot be set for the tolerance.
6
Sample No.
―
Displays the current sample number. Touching the left arrow /
right arrow button displays the previous/next page.
7
Register button
―
Registers the edited sample information. The [Recipe edit] screen
will be displayed.
When a sample is selected in the [Sample name] field (1), the input fields for Target value (2) and
Tolerance (5) are enabled.
The following samples are registered for the Selection button at the time of shipment from the factory.
Display in the [Molecular formula] field
Sample name
Molecular weight
NaH
2
PO
4
Sodium dihydrogen phosphate
119.98
Na
2
HPO
4
Disodium hydrogen phosphate
141.96
KH
2
OP
4
Potassium dihydrogen phosphate
136.09
K
2
HOP
4
Dipotassium hydrogen phosphate
174.18
C
6
H
8
O
7
_H
2
O
Citric acid hydrate
210.14
C
6
H
5
Na
3
O
7
_2H
2
O
Trisodium citrate dihydrate
294.10
CH
3
COONa
Sodium acetate
82.03
CH
3
COONH
4
Ammonium acetate
77.08
HCOONH
4
Ammonium formate
63.06
C
4
H
4
Na
2
O
6
_2H
2
O
Sodium tartrate dihydrate
230.08
H
3
BO
4
Boric acid
61.83
NaClO
4
Sodium perchlorate
122.44
NaCl
Sodium chloride
58.44
Summary of Contents for BA-T Series
