manualshive.com logo in svg

3onedata IES6306 Series, User Manual

Share
Download
3onedata IES6306 Series User Manual Download Page 84

                                                                   User Manual 

3onedata proprietary and confidential 

Copyright © 3onedata Co., Ltd. 

74 

 

Reauthenticate: Schedules a reauthentication whenever the quiet-period of the 
port runs out (EAPOL-based authentication). For MAC-based authentication, 
reauthentication will be attempted immediately. 
The button only has effect for successfully authenticated clients on the port and 
will not cause the clients to get temporarily unauthorized. 

 

Reinitialize: Forces a reinitialization of the clients on the port and thereby a 
reauthentication immediately. The clients will transfer to the unauthorized state 
while the reauthentication is in progress. 

Buttons 

Refresh: Click to refresh the page. 
Save: Click to save changes. 
Undo: Click to undo any changes made locally and revert to previously saved values. 

5.3.2  Network Access Server Switch Status 

This page provides an overview of the current NAS port states. 

 

Port 

The switch port number. Click to navigate to detailed NAS statistics for this port. 

Admin State 

The port's current administrative state. Refer to NAS Admin State for a description of 
possible values. 

Port Status 

The current state of the port. Refer to NAS Port State for a description of the individual 
states. 

Last Source 

The source MAC address carried in the most recently received EAPOL frame for 
EAPOL-based authentication, and the most recently received frame from a new client 
for MAC-based authentication. 

Summary of Contents for IES6306 Series








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands