manualshive.com logo in svg

3onedata IES6306 Series, User Manual

Share
Download
3onedata IES6306 Series User Manual Download Page 106

                                                                   User Manual 

3onedata proprietary and confidential 

Copyright © 3onedata Co., Ltd. 

96 

CIR 

The Committed Information Rate of the bandwidth profile. The allowed range is from 0 
through 10000000 kilobit per second. 

CBS 

The Committed Burst Size of the  bandwidth profile. The allowed range is from 0 
through 100000 bytes. 

EIR 

The Excess Information Rate for MEF type bandwidth profile. The allowed range is 
from 0 through 10000000 kilobit per second. 

EBS 

The Excess Burst Size for MEF type bandwidth profile. The allowed range is from 0 
through 100000 bytes. 

Buttons 

Refresh: Refresh the displayed table starting from the input fields. 
|<<: Updates the table, starting with the first entry in the table. 
<<: Updates the table, ending at the entry before the first entry currently displayed. 
>>: Updates the table, starting with the entry after the last entry currently displayed. 
>>|: Updates the table, ending at the last entry in the table. 
Save: Click to save changes. 
Reset: Click to undo any changes made locally and revert to previously saved values. 

5.6.4  EVCs Configuration 

This page displays current EVC configurations. On this system, only Provider Bridge 
based EVCs are supported. 

 

EVC ID 

The EVC ID identifies the EVC. The range is from 1 through 256. 

Name 

The name for the EVC. 

Summary of Contents for IES6306 Series








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands