3onedata IES6306 Series User Manual Download Page 119

Page: 119 / 263

User Manual

3onedata proprietary and confidential

109



Specific: If you want to filter a specific EVC ID with this ECE, choose this value.
A field for entering a specific value appears.

EVC ID Value

When "Specific" is selected for the VLAN ID filter, you can enter a specific value. The
allowed value is from 1 through 256.

Tag Pop Count

The ingress tag pop count for the ECE. The allowed range is from 0 through 2.

Policy ID

The ACL Policy ID for the ECE for matching ACL rules. The allowed range is from 0
through 255.

Class

The traffic class for the ECE. The allowed range is from 0 through 7 or disabled.

Egress Outer Tag
Mode

The outer tag for nni-to-uni direction for the ECE. Possible values are:



Enable: Enable outer tag for nni-to-uni direction for the ECE.



Disable: Disable outer tag for nni-to-uni direction for the ECE.

PEC/DEI Preservation

The outer tag PCP and DEI preservation for the ECE. Possible values are:



Preserved: The outer tag PCP and DEI is preserved.



Fixed: The outer tag PCP and DEI is fixed.

PCP

The outer tag PCP value for the ECE. The allowed range is from 0 through 7.

DEI

The outer tag DEI value for the ECE. The allowed value is 0 or 1.

Buttons

Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Cancel: Return to the previous page; any changes made locally will be undone.

Summary of Contents for IES6306 Series








































































































































































































































































Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands

3onedata IES6306 Series, User Manual

Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands