3onedata IES6306 Series User Manual Download Page 150

Page: 150 / 263

User Manual

3onedata proprietary and confidential

140

Rx and Tx Offer

The number of offer (option 53 with value 2) packets received and transmitted.

Rx and Tx Request

The number of request (option 53 with value 3) packets received and transmitted.

Rx and Tx Decline

The number of decline (option 53 with value 4) packets received and transmitted.

Rx and Tx ACK

The number of ACK (option 53 with value 5) packets received and transmitted.

Rx and Tx NAK

The number of NAK (option 53 with value 6) packets received and transmitted.

Rx and Tx Release

The number of release (option 53 with value 7) packets received and transmitted.

Rx and Tx Inform

The number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query

The number of lease query (option 53 with value 10) packets received and transmitted.

Rx and Tx Lease Unassigned

The number of lease unassigned (option 53 with value 11) packets received and
transmitted.

Rx and Tx Lease Unknown

The number of lease unknown (option 53 with value 12) packets received and
transmitted.

Rx and Tx Lease Active

The number of lease active (option 53 with value 13) packets received and transmitted.

Rx Discarded checksum error

The number of discard packet that IP/UDP checksum is error.

Rx Discarded from Untrusted

The number of discarded packet that are coming from untrusted port.

Buttons

The DHCP user select box determines which user is affected by clicking the buttons.
The port select box determines which port is affected by clicking the buttons.

Summary of Contents for IES6306 Series








































































































































































































































































Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands

3onedata IES6306 Series, User Manual

Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands