manualshive.com logo in svg

3onedata IES6306 Series, User Manual

Share
Download
3onedata IES6306 Series User Manual Download Page 16

                                                                   User Manual 

3onedata proprietary and confidential 

Copyright © 3onedata Co., Ltd. 

6 

Undo: Click to undo any changes made locally and revert to previously saved values. 

2.1.2  System Information Monitor 

The switch system information is provided here. 

 

Contact 

System contact configured by the path "System > System Information Configuration > 
System Administrator". 

Name 

System name configured by the path "System > System Information Configuration > 
Information > System Name". 

Position 

The location configured in “System > System Information Configuration > Information > 
System Location”. 

MAC Address 

The MAC Address of this switch. 

System Date 

The current (GMT) system time and date. The system time is obtained through the 
Timing server running on the switch, if any. 

System Uptime 

The period of time the device has been operational. 

Software Version 

The software version of this switch. 

Software Date 

The date when the switch software was produced. 

Summary of Contents for IES6306 Series








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands