3onedata IES6306 Series User Manual Download Page 146

Page: 146 / 263

User Manual

3onedata proprietary and confidential

136

Receive from Server

The number of packets received from server.

Receive Missing Agent Option

The number of packets received without agent information options.

Receive Missing Circuit ID

The number of packets received with the Circuit ID option missing.

Receive Missing Remote ID

The number of packets received with the Remote ID option missing.

Receive Bad Circuit ID

The number of packets whose Circuit ID option did not match known circuit ID.

Receive Bad Remote ID

The number of packets whose Remote ID option did not match known Remote ID.

Client Statistics
Transmit to Client

The number of relayed packets from server to client.

Transmit Error

The number of packets that resulted in error while being sent to servers.

Receive from Client

The number of received packets from server.

Receive Agent Option

The number of received packets with relay agent information option.

Replace Agent Option

The number of packets which were replaced with relay agent information option.

Keep Agent Option

The number of packets whose relay agent information was retained.

Drop Agent Option

The number of packets that were dropped which were received with relay agent
information.

Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Refresh: Click to refresh the page immediately.

Summary of Contents for IES6306 Series








































































































































































































































































Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands

3onedata IES6306 Series, User Manual

Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands