User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
169
Delete
Check the corresponding check box to delete an entry. It will be deleted during the next
Save operation.
Groups
Support ring group 1-4, it can create 4 ring networks at the same time.
Network ID
When multiple switch devices constitute a ring network, the current ring identification
of the ring is network identification; the network identifications of different ring network
are different.
Type
According to the scene environment requirement, choose different ring type.
Single: Single ring, it adopts a continuous ring to connect each device together.
Couple: Coupling ring is a redundant structure proposed to connect two independent
networks.
Chain: The chain, it enhances the flexibility that user builds any type of redundant
network topology structure via a kind of advanced software technology.
Dual-homing: Two adjacent rings share a switch; users can carry the same switch on
two different networks or two different switching devices on the same network.
Port1
The network port 1 on the switch device used to form the ring network.
Port2
The network port 2 on the switch device used to form the ring network.
Hello Time
Hello_time is the sending time interval of Hello packet; via the ring port, CPU sends
information packet to adjacent device for confirming the connection is normal or not.
Master/Slave
Single ring has master/slave device option. One-Master Multi-Slave mode is
recommended in one single ring. When the device is set as master device and one
end of it is backup link, it can enable backup link to ensure the normal operation of the
network when failure occurs in ring network.
Note:
Some products don’t support Master-slave option, so their ring network is non-master station
structure.
