3onedata IES6306 Series User Manual Download Page 142

Page: 142 / 263

User Manual

3onedata proprietary and confidential

132

NAK

Number of DHCP NAK messages sent.

Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh

occurs every 3 seconds.

Refresh: Click to refresh the page immediately.
Clear: Click to clear DHCP Message Received Counters and DHCP Message Sent
Counters.

6.3.5 Binding Monitoring

DHCP Server Binding IP

This page displays bindings generated for DHCP clients.

Binding IP Address

Display all bindings.

IP address allocated to DHCP client.

Type

Type of binding. Possible types are Automatic, Manual, Expired.

Status

State of binding. Possible states are Committed, Allocated, Expired.

Pool Name

The pool that generates the binding.

Server ID

Server IP address to service the binding.

Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh

occurs every 3 seconds.

Refresh: Click to refresh the page immediately.

Summary of Contents for IES6306 Series








































































































































































































































































Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands

3onedata IES6306 Series, User Manual

Search results

Summary of Contents for IES6306 Series

Reviews:

Brands by name

Popular brands