3Com NBX, Manual

Page: 92 / 158

92 C
HAPTER
6: F
EATURE
C
ODES
Call Pickup — Group F + 456 + call pickup group number “Call Pickup” in Chapter 7
Call Privacy — On/Off F + 428 “Call Privacy” in Chapter 7
Call Toggle F + 409 Toggles between two calls. To return to
the first call, press the button for the line
where the first call came in, press
Call
Toggle (2101), or repeat F + 409.
Caller ID Restriction
(CLIR — All) — On/Off
F + 889 “Caller ID” in Chapter 7
Caller ID Restriction
(CLIR — Next Call)
F + 890 “Caller ID” in Chapter 7
Camp On — Direct F + 468 + destination extension “Initiating Direct Camp On” in
Chapter 4
Camp On — With Call
Transfer
F + 420 + destination ext F +
468
“Initiating Camp On With Call Transfer”
in Chapter 4
Class of Service Override F + 433 + your own ext your
pa + the outside party’s
number
“Class of Service Override” in Chapter 5
Conference Call — Add F + 430 + telephone number
+ F + 430
“Establishing a Conference Call Using
Feature Codes” in Chapter 4
Conference Call — Drop F + 431 “Establishing a Conference Call Using
Feature Codes” in Chapter 4
Direct Mail Transfer F + 441 + other person’s ext
hang up
“Direct Mail Transfer” in Chapter 4
Do Not Disturb — On/Off F + 446 “Managing Off-site Notification Using
the Telephone” in Chapter 5
Extend Wrap-Up Time F + 973 “Extend Wrap-Up Time” in Chapter 7
Flash F + 260 If your NBX system is connected to a
Central Office (CO) by one or more
Analog Line Card ports, and if the CO
provides a feature such as Call Waiting
that requires a flash signal, use this
sequence to signal the CO to put the
existing call on hold and toggle to the
call that is waiting.
To return to the first call, repeat F + 260.
Forward All Calls to
Voice Mail — On/Off
F + 440 “Forwarding a Message” in Chapter 3
Table 6 NBX Feature Codes (Alphabetical by Feature or Task)
Feature Feature Code See
#