3Com NBX, Manual

Page: 72 / 158

72 C
HAPTER
5: P
ERSONALIZING
Y
OUR
T
ELEPHONE
Feature Use this button to access any system feature by pressing it
and then dialing a Feature Code.
For example, if a telephone does not have a button
programmed for Call Park, you can press the Feature
button, and then dial the Call Park Feature Code (444) to
access the Call Park feature.
“Using Feature Codes” in
Chapter 6
Flash If your NBX system is connected to a Central Office (CO) by
one or more Analog Line Card ports, and if the CO
provides a feature such as Call Waiting that requires a flash
signal, press this button to signal the CO to put the existing
call on hold and toggle to the call that is waiting.
To return to the first call, press this button again.
Fwd Vmail Press this button to direct all incoming calls to your voice
mail (or to wherever you have specified in the NBX NetSet
utility
Call Forward > Call Forward
“Setting Call Forward from the
Telephone” in Chapter 5
grp login/out 0–99
(0–29 on NBX 100)
Press this button and enter the appropriate password to log
in to or out of an Automatic Call Distribution, Hunt, or
Calling group.
Maps one of the group login/logout Feature Codes (login
numbers to this button. (Ask your administrator for what
login number to use.) Each login number logs you in or out
of the associated group.
“Automatic Call Distribution
Groups, Hunt Groups, and
Calling Groups”
in Chapter 7
Line/Extension Use this button to map to the extension of another
telephone (to create a Busy Lamp/Speed Dial) or Analog
Terminal Adapter (ATA). (Only your administrator can map
this button to an external or call park extension.)
Number — Enter the extension (with no spaces or special
characters) associated with the telephone or ATA port.
Priority — Enter a number to identify which button has
precedence. The button with the lowest value becomes
active when you lift the receiver or press speaker.
MWI For VM Assigns the Message Waiting Indicator to this button. The
lamp next to the button lights when you have a message in
your mailbox.
Number — Enter the voice mailbox number (telephone
extension) when prompted.
“Telephone Buttons and
Controls” in Chapter 2
MWI To Ph Send Press this button to send an MWI message to any other
phone in the system that has a mapped MWI Retrieve
button with an associated LED. “Using Message Waiting
Indicator to Telephone” in
Chapter 7
Table 5 User Button Mappings (continued)
Function Button Description For more information, see