3Com NBX, Manual

Page: 111 / 158

WhisperPage 111
Starting a
WhisperPage Session
To start a WhisperPage session:
1 Pick up the handset.
2 Press Feature + 426 . Or press the Access Button if one is configured for
WhisperPage .
The display panel prompts you for the WhisperPage extension.
3 Enter the extension you want to whisper to and press the OK soft button
or press .
If the listener’s telephone has a display panel, it shows the WhisperPage
icon and your extension. Additionally, an optional tone may be played to
alert the listener.
At this point, the listener can either accept the WhisperPage request by
doing nothing, or refuse the request by activating Do Not Disturb.
If the listener accepts the WhisperPage request, after a brief delay, you
will hear a tone that tells you to begin the WhisperPage session.
Additionally, your telephone’s display panel shows “Whispering” and the
listener’s extension.
4 Begin speaking. When you have finished, go off-hook to end the
WhisperPage session.
More About
WhisperPage
The following usage tips and limitations apply to WhisperPage:
■
The WhisperPage listener can refuse or end a WhisperPage session at
any time by activating Do Not Disturb.
■
You cannot initiate a WhisperPage session to:
■
A Supervisory Monitoring call
■
A call that is on hold
■
While using WhisperPage, if either the listener or the other party on
the call invokes Transfer, Park, Conference, or Forward to VM, the
WhisperPage session ends.
■
You can start up to two simultaneous WhisperPage sessions, one or
both on hold, providing you have a line available for each session.
For additional tips and considerations on using WhisperPage, see your
system administrator.
#