Configuring and Managing E1 Digital Line Cards
277
5
Click
Modify
. Figure 105 shows the
Modify Channel
dialog box.
Figure 105
Modify Channel Dialog Box
6
Fill in or change the fields in the appropriate Modify Channel dialog box.
Table 45 describes each parameter.
Table 48
Channel Parameters
Parameter
E1 ISDN PRI Options
Group Name
A name that helps you identify this group in lists.
Trunk to Trunk
Unrestricted
enables and
Restricted
disables the transfer of
incoming calls to another line card port. For example, you
could enable Trunk to Trunk transfers if you plan to
connect a Voice Over IP (VOIP) gateway to a line card port
and let callers use the system to access the telephone
system from a remote location and use it to make CO calls.
AutoExt
The extension to which an unanswered call (on this line
card port) is directed. You can assign a different AutoExt
for each period of the day: Open, Closed, Lunch, and
Other.
Channel Name
A name that helps you identify this channel in lists.
Board MAC Address
The MAC address of the board.
Channel MAC Address
The MAC address of the channel.
Current State
The state of the board and channel.
Span ID/Device #
The span number and device number.
Extension
The extension number assigned to this channel.
Summary of Contents for NBX 100
