290
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Figure 114
Modify Board Dialog Box — T1
6
Scroll through the
Channel List
to verify that the system lists all
24 channels. Figure 114 shows the first few channels. The channel
numbers appear after the MAC address, separated by a dash.
Example:
In the figure, the fourth line in the MAC address column
appears as:
00:e0:bb:00:bd:f0-4...New Trunk
The 4 after the hyphen indicates channel number 4.
7
To change the name of the T1 Digital Line Card, enter a new name in the
Board Name
field. The name you choose helps identify this card in lists
that contain similar cards. You can use alphanumeric characters, dashes,
and underscores. The maximum name length is 30 characters, but some
dialog boxes truncate the name field to 15 characters.
8
Click
Apply
to verify your changes
.
9
Click OK to exit.
Summary of Contents for NBX 100
