![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814300.webp)
300
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Configuring T1 Groups (ISDN PRI)
To configure a T1 ISDN PRI Group:
1
Return to the
Digital Line Cards
tab (Figure 113).
2
From the
Select Device Type
list, select
ISDN PRI Group List
.
3
Click
Apply
.
4
From the
ISDN PRI Group List,
select
PRI Group 1
.
5
Click
Modify.
The
Modify Group — T1 ISDN PRI
dialog box (Figure 121)
appears.
Figure 121
Modify Group Dialog Box — T1 ISDN PRI
6
To modify the name of the group, enter a new name in the Group Name
field. You can use alphanumeric characters, dashes, and underscores. The
maximum name length is 30 characters.
7
To prohibit call transfers between trunk lines, select
Restricted
(the
default value) from the
Trunk to Trunk
pull-down list. Otherwise, select
Unrestricted
.
8
Click the
On Line
check box.
9
Verify that
500
(the default) is in each of the four
AutoExt
text boxes.
10
Click
OK
.
Summary of Contents for NBX 100
