![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814243.webp)
Configuring and Managing BRI-ST Digital Line Cards
243
Figure 81
Modify Board Dialog Box — ISDN BRI
4
Scroll through the
Channel List
to verify that the system lists all eight
channels. Figure 81 shows the first few channels; the channel numbers
appear after the MAC address, separated by a dash.
Example:
In the figure, the fourth line appears as:
2...00:01:03:48:e0:4e-4...New Trunk.
The 4 after the dash indicates channel number 4.
5
To change the name of the BRI-ST board, edit the contents of the
Board
Name
field to help you to identify the BRI-ST board in device lists.
6
Enable the
On Line
check box.
7
Click
OK
.
To connect the BRI line and activate the span:
1
Plug the BRI line into the BRI interface box.
2
Using a category 5 Ethernet cable, connect the BRI interface box to one
of the four ports on the front panel of the BRI-ST board.
3
The
Card Type
field should contain ISDN BRI. If it does not, the system has
not properly autodiscovered the board. Restart the installation process.
Summary of Contents for NBX 100
