![background image](http://html1.mh-extra.com/html/3com/nbx-100/nbx-100_administrators-manual_440814192.webp)
192
C
HAPTER
3: D
EVICE
C
ONFIGURATION
Removing an
Attendant Console
To remove an NBX 1105 Attendant Console from the system:
1
In the
NBX NetSet - Main Menu
window, click
Device Configuration
. The
Device Configuration dialog box appears (Figure 49).
2
Click the
Attendant Console
tab. The Attendant Console dialog box
appears (Figure 63).
3
Select the Attendant Console that you want to remove.
4
Click
Remove
. A dialog box prompts you to confirm the removal.
5
Click
Yes
. The system removes the Attendant Console.
Configuring
Attendant Console
Buttons
This section describes how to configure the buttons on the NBX 1105
Attendant Console. The Attendant Console buttons include:
■
50 Access buttons. You can assign each button two settings.
■
A Shift button. This button switches between the two settings
allowed for each Access button.
■
Four Feature buttons, located below the Access buttons.
Configuring Feature Buttons
To map the Attendant Console Feature Buttons:
1
In the
NBX NetSet - Main Menu
window, click
Device Configuration
. The
Device Configuration dialog box appears (Figure 49).
2
Click the
Attendant Console
tab. The Attendant Console dialog box
appears (Figure 63).
3
Select the Attendant Console for which you want to map Feature
Buttons.
Summary of Contents for NBX 100
