manualshive.com logo in svg

3Com 3C10402B, Administrator'S Manual

Share
Download
3Com 3C10402B Administrator'S Manual Download Page 454

454

A

PPENDIX

 B: ISDN C

OMPLETION

 C

AUSE

 C

ODES

0x4F

79

Service not 
implemented, 
unspecified

Reports the service (or option) not implemented event only 
when no other cause in the service (or option) not 
implemented class applies.

Invalid message

0x51

81

Invalid call 
reference

The equipment sending this cause has received a message 
with a call reference that is not currently in use on the user 
network interface.

0x52

82

Chan does not 
exist

The equipment sending this cause has received a request to 
use a channel that is not activated on the interface for a 
call.

0x53

83

Suspended call 
exists, call 
identity does 
not

A call resume has been attempted with a call identity that 
differs from that in use for any currently suspended calls.

0x54

84

Call identity in 
use

The network has received a call suspended request that 
contained a call identity (including the null call identity) that 
is already in use for a suspended call within the domain of 
interfaces over which this call might be resumed.

0x55

85

Incompatible 
destination

0x58

88

Incompatible 
destination

The equipment sending this cause has received a request to 
establish a call that has low layer compatibility, high layer 
compatibility, or other compatibility attributes (for example, 
data rate) that cannot be managed.

0x5B

91

Transit network 
does not exist.

0x5F

95

Invalid message 
(unspecified)

Reports an invalid message event only when no other cause 
in the invalid message call applies.

Protocol error

0x60

96

Mandatory IE 
missing

The equipment sending this cause has received a message 
that is missing an information element that must be present 
in the message before that message can be processed.

0x61

97

Nonexistent 
message

The equipment sending this cause has received a message 
with a message type that it does not recognize, either 
because it is an undefined message, or it is defined but not 
implemented by the equipment sending the cause.

0x62

98

Wrong 
message

The equipment sending this cause has received a message 
that it considers as not permitted while in the call state; or a 
STATUS message was received indicating an incompatible 
call state.

Table 86   

Completion Cause Codes (continued)

Class Grouping

Hex 
Code

Decimal 
Code

Description

Details

Summary of Contents for 3C10402B







































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands