3Com 3C10402B, Administrator'S Manual

Page: 161 / 582

Configuring and Managing Analog Line Card Ports 161
To remove a line card port:
1 Click PSTN Gateway Configuration > Analog Line Cards .
2 Select the extension, or extensions, of the line card port that you want to
delete and click
Remove Selected . To select all extensions, enable the
Select check box.
3 Click OK when the system prompts you to confirm.
Verifying Line Card
Port Status
You can verify the status of a configured line card port at any time.
To view the status of a line card port:
1 Click
PSTN Gateway Configuration
> Analog Line Cards .
2 Click the extension of the line card port.
3 Click the Status tab.
4 See the online Help for more information.
Rebooting a
Line Card Port
To reboot a line card port:
1 Click PSTN Gateway Configuration > Analog Line Cards .
2 Click the extension of the line card port.
3 Click the Status tab.
4 Click Reset Device .
CAUTION: On the 3C10117 Analog Line Card, you can reboot individual
ports without affecting the other ports. However, if you reboot an analog
port on the 3C10114C or 3C10114D Analog Line Card, the system
reboots all ports on the card. This action can disrupt active telephone calls
on any of these ports.
Advanced Settings The Advanced Settings window enables you to set the audio gain and
timing controls on each port of an Analog Line Card.
To set these parameters:
1 Click PSTN Gateway Configuration > Analog Line Cards .
2 Click the extension of the line card port.
3 Click the Advanced Settings tab.