3Com 3C10402B, Administrator'S Manual

Page: 104 / 582

104 C
HAPTER
5: T
ELEPHONE
C
ONFIGURATION
To configure the 3Com 3103 Manager’s Telephone as a primary
telephone, you do not need to map primary bridged extensions to a
button. Use the Displayed Call Appearances section of the Button
Mapping window to configure the telephone (See Figure 6).
Figure 6 Telephone Button Mapping Window for 3Com 3103 Manager’s
Telephone
■
From the Primary Bridged Extensions Quantity drop-down list, choose
the desired number of primary bridged extensions, which also defines
this telephone as a primary telephone. The maximum number of
primary bridged appearances and system appearances, which you
define from the System Appearances Quantity drop-down list, cannot
total more than 12.
■
From the System Appearances Quantity drop-down list, choose the
number of system appearances for the telephone. The default number
of system appearances is 3. The maximum number of system
appearances and primary bridged extensions cannot total more than
12.
■
Click the check box Show caller ID on secondary bridged extensions
when on call check box so that this primary telephone’s extension