3Com 3C10402B, Administrator'S Manual

Page: 437 / 582

System-level Troubleshooting 437
Configuration and
Status Reports
You can obtain the status of all Digital Line Cards in the system with
either of these two methods:
Select PSTN Gateway Configuration > Digital Line Cards and:
■
Click Config & Status Report , which displays a formatted report with
headings shown in a larger font in the window.
■
Click Export Report , which displays an unformatted report in the
window. To save the report as an ASCII text file, select Save as from
the File menu of your browser.
Table 83 describes in alphabetical order (not the order of appearance) the
headings in the Configuration and Status Report.
Table 82 3C10165D and 3C10116D Status Lights and Error Conditions
Status Light Purpose
CO Green: There are no error or alarm conditions.
Amber: An alarm condition at the remote end or the CO is
not connected or available. To determine which alarm state
exists:
1 Log on to the NBX NetSet utility using the administrator ID
and password.
2 Click PSTN Gateway Configuration > Digital Line Cards .
3 In the Select Device Type list, select T1 Spans or ISDN PRI
Spans, and then click Apply .
4 Select the span you want and click Status . The words Red
Alarm or Blue Alarm appear in the Status field.
Table 83 Configuration and Status Report Headings
Heading Description
#Chs Number of channels.
#Dsp Number of digital signal processors.
#OffChs Number of channels in the offline state.
#OnChs Number of channels in the online state.
AEClosed Autoattendant extension when business is closed.
AELunch Autoattendant extension when business is at lunch.
AEOpen Autoattendant extension when business is open.
AEOther Autoattendant extension for Other hours.