ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 250 / 645

Chapter 24 VLAN Stacking
XGS4600 Series User’s Guide
250
Figure 192 VLAN Stacking Example
24.2 VLAN Stacking Port Roles
Each port can have three VLAN stacking “roles”, Normal , Access Port and Tunnel Port (the latter is for
Gigabit ports only).
• Select Normal for “regular” (non-VLAN stacking) IEEE 802.1Q frame switching.
• Select Access Port for ingress ports on the service provider's edge devices ( 1 and 2 in the VLAN
stacking example figure). The incoming frame is treated as "untagged", so a second VLAN tag (outer
VLAN tag) can be added.
Note: Static VLAN Tx Tagging MUST be disabled on a port where you choose Normal or
Access Port .
• Select Tunnel Port (available for Gigabit ports only) for egress ports at the edge of the service
provider's network. All VLANs belonging to a customer can be aggregated into a single service
provider's VLAN (using the outer VLAN tag defined by the Service Provider’s (SP) VLAN ID (VID)).
Note: Static VLAN Tx Tagging MUST be enabled on a port where you choose Tunnel Port .
24.3 VLAN Tag Format
A VLAN tag (service provider VLAN stacking or customer IEEE 802.1Q) consists of the following three
fields.
Table 94 VLAN Tag Format
Type Priority VID