manualshive.com logo in svg

ZyXEL Communications XGS4600 Series, Руководство пользователя

Серия сетевого оборудования ZyXEL Communications XGS4600 предлагает высокую производительность и надежность. Ознакомьтесь с подробными инструкциями по настройке и использованию в руководстве пользователя. Скачайте его бесплатно с нашего сайта manualshive.com.

Поделиться
Скачать
background image

 Chapter 21 Classifier

XGS4600 Series User’s Guide

235

MAC 
Address

Select 

Any

 to apply the rule to all MAC addresses.

To specify a source, select 

MAC/Mask

 to enter the source MAC address of the packet in valid MAC 

address format (six hexadecimal character pairs) and type the mask for the specified MAC address to 
determine which bits a packet’s MAC address should match.

Enter “f” for each bit of the specified MAC address that the traffic’s MAC address should match. Enter 
“0” for the bits of the matched traffic’s MAC address, which can be of any hexadecimal characters. 
For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet 
with a MAC address of 00:13:49:12:34:56 matches this criteria. If you leave the 

Mask

 field blank, the 

Switch automatically sets the mask to ff:ff:ff:ff:ff:ff.

Destination

MAC 
Address

Select 

Any

 to apply the rule to all MAC addresses.

To specify a destination, select 

MAC/Mask

 to enter the destination MAC address of the packet in 

valid MAC address format (six hexadecimal character pairs) and type the mask for the specified MAC 
address to determine which bits a packet’s MAC address should match.

Enter “f” for each bit of the specified MAC address that the traffic’s MAC address should match. Enter 
“0” for the bits of the matched traffic’s MAC address, which can be of any hexadecimal characters. 
For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet 
with a MAC address of 00:13:49:12:34:56 matches this criteria. If you leave the 

Mask

 field blank, the 

Switch automatically sets the mask to ff:ff:ff:ff:ff:ff.

Layer 3

Specify the fields below to configure a layer 3 classifier.

IP Packet 
Length

Click 

Any

 to classify any size of packet length or manually enter a range of number (from/to) of 

packet size in the field provided.

DSCP

IPv4/IPv6

Select 

Any

 to classify traffic from any DSCP or select the second option and specify a DSCP (DiffServ 

Code Point) number between 0 and 63 in the field provided.

Preceden
ce

Select 

Any

 to classify traffic from any precedence or select the second option and specify an IP 

Precedence (the first 3 bits of the 8-bit ToS field) value between 0 and 7 in the field provided.

ToS

Select 

Any

 to classify traffic from any ToS or select the second option and specify Type of Service (the 

last 5 bits of the 8-bit ToS field) value between 0 and 255 in the field provided.

IP Protocol Select an IPv4 protocol type or select 

Other

 and enter the protocol number in decimal value.

You may select 

Establish Only

 for 

TCP

 protocol type. This means that the Switch will pick out the 

packets that are sent to establish TCP connections.

IPv6 Next 
Header

Select an IPv6 protocol type or select 

Other 

and enter an 8-bit next header in the IPv6 packet. The 

Next Header field is similar to the IPv4 Protocol field. The IPv6 protocol number ranges from 1 to 255.

You may select 

Establish Only 

for 

TCP 

protocol type. This means that the Switch will identify packets 

that initiate or acknowledge (establish) TCP connections.

Source

IP 
Address/
Address 
Prefix

Enter a source IP address in dotted decimal notation.

Specify the address prefix by entering the number of ones in the subnet mask.

A subnet mask can be represented in a 32-bit notation. For example, the subnet mask “255.255.255.0” 
can be represented as “11111111.11111111.11111111.00000000”, and counting up the number of 
ones in this case results in 24.

Destination

IP 
Address/
Address 
Prefix

Enter a destination IP address in dotted decimal notation.

Specify the address prefix by entering the number of ones in the subnet mask.

Table 87   Advanced Application > Classifier > Classifier Configuration (continued)

LABEL

DESCRIPTION

Содержание XGS4600 Series






































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XGS4600 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Бренд: D-Link Страницы: 267
Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Бренд: Baracoda Страницы: 42
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Бренд: 8e6 Technologies Страницы: 66
Enginko MCF-LW06424 Operating Manual preview
MCF-LW06424
Бренд: Enginko Страницы: 19
IDT Tsi310TM User Manual preview
Tsi310TM
Бренд: IDT Страницы: 207
Infoblox Trinzic 100 Installation Manual preview
Trinzic 100
Бренд: Infoblox Страницы: 13
IBM EtherLink XL User Manual preview
EtherLink XL
Бренд: IBM Страницы: 72
Oracle Acme Packet 3900 Hardware Installation And Maintenance Manual preview
Acme Packet 3900
Бренд: Oracle Страницы: 70
Ubiquiti EdgeRouter X ER-X-SFP Quick Start Manual preview
EdgeRouter X ER-X-SFP
Бренд: Ubiquiti Страницы: 20
Positron TeleLite 720920 Series Manual preview
TeleLite 720920 Series
Бренд: Positron Страницы: 21
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Бренд: ADTRAN Страницы: 4
IEI Technology PUZZLE-5030 User Manual preview
PUZZLE-5030
Бренд: IEI Technology Страницы: 119
Data-Tronix DT-ATSC-IP-8 User Manual & Installation Manual preview
DT-ATSC-IP-8
Бренд: Data-Tronix Страницы: 15
Tripp Lite N304-15M Specification Sheet preview
N304-15M
Бренд: Tripp Lite Страницы: 2
Tripp Lite N304-11M Specification Sheet preview
N304-11M
Бренд: Tripp Lite Страницы: 2
Epson USB User Manual preview
USB
Бренд: Epson Страницы: 8
Epson EFM144FP Specification preview
EFM144FP
Бренд: Epson Страницы: 2
Epson RS-485 Brochure & Specs preview
RS-485
Бренд: Epson Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды