ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 219 / 645

Chapter 18 Port Authentication
XGS4600 Series User’s Guide
219
18.6 Compound Authentication
Use this screen to allow network access for clients that:
• pass either IEEE 802.1x authentication OR MAC authentication, or
• pass both IEEE 802.1x authentication AND MAC authentication.
The authentication modes are:
• In IEEE 802.1x authentication, the Switch prompts the client for login information in the form of a user
name and password. When the client provides the login credentials, the Switch sends an
authentication request to a RADIUS server. The RADIUS server validates whether this client is allowed
access to the port. Use the AAA > RADIUS Server Setup screen to configure the RADIUS server.
• In MAC authentication, the login credentials are based on the source MAC address of the client
connecting to a port on the Switch along with a password configured specifically for MAC
authentication on the Switch.
In the Port Authentication screen click Compound Authentication Mode to display the configuration
screen as shown.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 81 Advanced Application > Port Authentication > Guest VLAN (continued)
LABEL DESCRIPTION