ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 227 / 645

Chapter 19 Port Security
XGS4600 Series User’s Guide
227
19.3 VLAN MAC Address Limit
Use this screen to set the MAC address learning limit on per-port and per-VLAN basis. Click VLAN MAC
Address Limit in the Advanced Application > Port Security screen to display the screen as shown.
Figure 180 Advanced Application > Port Security > VLAN MAC Address Limit (Standalone Mode)
Figure 181 Advanced Application > Port Security > VLAN MAC Address Limit (Stacking Mode)
Address Learning MAC address learning reduces outgoing broadcast traffic. For MAC address learning to occur
on a port, the port itself must be active with address learning enabled.
Limited Number
of Learned MAC
Address Use this field to limit the number of (dynamic) MAC addresses that may be learned on a port.
For example, if you set this field to "5" on port 2, then only the devices with these five learned
MAC addresses may access port 2 at any one time. A sixth device must wait until one of the
five learned MAC addresses ages out. MAC address aging out time can be set in the
Switch
Setup screen. The valid range is from “0” to “32K”. “0” means this feature is disabled.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 83 Advanced Application > Port Security (continued)
LABEL DESCRIPTION