Zontes ZT350-V1, Руководство по обслуживанию

Страница: 119 / 120

14
、
LOWER SHROUD COMPONENT
118
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251112-001093 M6×16 Hexagon flange bolts (color zinc) 1
2 1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc) 1
3 1274100-007000 ZT250-S flanging sleeve(φ6.4×φ9×6
＋
φ20×2) 4
4 1244100-004000 ZT250-S Flanging bushing buffer 4
5 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 4
6 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 4
7 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 6
8 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 6
Fig.1 LOWER SHROUD
COMPONENT
Lower shroud component-1
PROCEDURE:
●
Lower shroud assembly
Raise the platform of the motorcycle.
After grasping the lower air deflector assembly, use 4# inner hexagon to 2 bolts
⑸
on the right side and
bottom of left side, and remove the bushing
⑵
.
After grasping the lower air deflector assembly then using 8# plum wrench removing the bolt
⑴
and bolt
⑶
at the middle of the lower air deflector assembly, remove the 2 pieces of bushing
⑵
.
Take off the lower air deflector assembly.
Take off 4 pcs cushion rubber
⑷
.
After placing the lower air deflector assembly, remove the bolt
⑸
and
⑹
on the right with a 4# inner
hexagon, and remove the bushing
⑺
and cushion rubber
⑻
. Separate the right part of the lower air deflector
assembly from the lower air deflector assembly.
Separate the left part of the lower air deflector assembly from the middle part of the lower air deflector
assembly according to the above steps.
CAUTION:
●
The motorcycle support should be fixed during disassembly to prevent accidents caused by incline.
●
The shroud should be supported during disassembly to prevent fracture due to uneven force.