Zontes ZT350-V1, Руководство по обслуживанию

Страница: 88 / 120

7
、
FRONT FORK COMPONENT
87
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251300-088000 ZT350-R Upper connecting plate decorative nut M22×1 1
2 1251500-100000 φ22.5×φ39×1 gasket (chrome plated) 1
3 1250205-023000 GB70.1 inner hexagonal M8×35 (color Zinc) 6 25N.m
4 1114300-012000 ZT350-V Front Left Shock Absorber 1
5 1114300-013000 ZT350-V front right shock absorber 1
6 1174300-013000 Reflection light(KM-106) 2
7 1251100-121093 Non-standard bolt M6×25 (environmental color) 2
8 1250501-007093 GB93 φ8 (environmental color) 2
Front shock absorber, upper plate component
ZT310 main lock (electromagnetic drive/wire length
450) assembly
1184200-138000 9 1
PROCEDURE:
●
Uplink board assembly
Use a 30# sleeve to remove the nut
⑴
, and remove the gasket
⑵
.
Use 6# inner hexagon to remove the upper link plate bolt (3).
●
Front left and right shock absorption
Using 4# inner hexagon socket remove the bolts
⑶
of the lower plate,and hold the shock absorber in the
middle with one hand. Insert a slotted screwdriver into the slot of the upper and lower plates to slightly
enlarge the slot clearance, and disassemble the left shock absorber
⑷
and the right shock absorber
⑸
. under.
Remove the upper plate assembly.
●
Reflecting film
Rotating the reflector
⑹
counterclockwise and take off it.
●
Faucet lock
Remove bolt
⑺
with 6# inner hexagon, and remove spring washer
⑻
and faucet lock
⑼
.
CAUTION:
●
Use a flat-blade screwdriver to enlarge the gap between the upper and lower joint plates without applying
excessive force to avoid damage.
●
The vehicle support should be fixed during the disassembly process to prevent accidents caused by
dumping.
●
When replacing the main lock,left and right wiring bracket,pay attention to adjust the gap between
adjacent parts.
●
For the disassembly of the lower board components, see "Steering Adjustment" above, which will not be
repeated here.
Fig.27 FRONT FORK
COMPONENT