Zontes ZT350-V1, Руководство по обслуживанию

Страница: 103 / 120

8
、
FUEL TANK COVER COMPONET
102
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
2 1274200-276000 ZT310-VX Fuel tank lower decorative cover bracket 2
3 1250303-010093 GB6177.1M6 (environmental color) 2
4 4024200-095051 ZT310-VX left fuel tank decorative cover bracket 1
5 1240300-021000 HJ125-6 pod glass strip (1.5m) 0.1
6 4024200-094051 ZT310-VX right fuel tank decorative cover bracket 1
7 1251300-063093 Plywood M6×11×15(color Zinc) 2
8 1224100-033000 ZT250-S thread cap of the fuel tank 1
Fig. 10 FUEL TANK COVER
COMPONET
Fuel tank decorative cover bracket
PROCEDURE:
●
Fuel tank decorative cover bracket
Fix the bolt
⑴
in the middle and lower part of the left fuel tank with a 4# inner hexagon bolt
⑴
, then use a
10# sleeve to remove the nut
⑵
on the back of the bracket
⑵
, and remove the decorative cover bracket
⑵
.
Use a 10# open-end wrench to fix the nut
⑶
at the bottom installation point of the left decorative cover
bracket
⑷
, and then remove the bolts
⑴
with a 4# hexagon socket; after holding the bracket firmly, remove
the other 2 bolts
⑴
and then attach the left decorative cover bracket
⑷
.
Remove the rubber strip
⑸
on the left.
Remove the lower decorative cover bracket
⑵
, the right decorative cover bracket
⑹
and the rubber strip
⑸
on the right according to the above steps.
Remove the 2 pieces of splint
⑺
from the fuel tank.
Rotate the fuel tank cap
⑻
counterclockwise, remove the fuel in the fuel tank as much as possible. Be careful
not to pull the nylon rope during disassembly.
CAUTION:
●
The parts should be protected during the disassembly process to prevent damage to the paint surface.
●
Before disassembling the fuel tank assembly, it is recommended to use the oil pump to pull out the fuel or
use off the fuel
●
Fireworks, telephone calls should not be allowed near the motorcycle -removal workshop to prevent
accidents.