Zontes ZT350-V1, Руководство по обслуживанию

Страница: 107 / 120

10
、
GUARD BAR COMPONENT
106
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1224300-110000 Reverse buckle Velcro strap (20×200mm) 1
2 1050958-007000 ZT350 EFI high voltage line 1
3 1251300-057093 Non-standard nut M10×1.5(Dacromet) 1
4 1251100-132003 Non-standard bolt M10×1.5×80 (Dacromet) 1
5 1250305-009091 GB6187.1 M12×1.25(White zinc) 1
7 1251100-082093 Non-standard bolts M10×1.5×20(Dacromet) 2
Fig.2 GUARD BAR
COMPONENT
Guard bar assembly 2
PROCEDURE:
●
Bumper assembly
Remove the cable tie
⑴
) and unplug the two plugs of the rectifier
⑴
. Pull out the rubber cap of the high-
voltage wire
⑵
.
Use a 14# sleeve to fix the head of the bolt
⑷
on the left side and remove the nut
⑶
with a 14# sleeve, and
remove the auxiliary water tank bracket.
Use a 14# sleeve to fix the head of the bolt
⑹
on the right side and remove the nut
⑸
with a 17# sleeve.
After grasping the left and right guard rail assemblies, use a 14# sleeve to remove 2 bolts
⑺
, and then
remove the left and right guard guard assemblies after removing the bolts
⑷
.
CAUTION:
●
Be careful not to press any cables when reassembling
GB5187 non-standard bolt M12×1.25×105(10.9
garde/dacromet)
6 1251112-018000 1